MAX394EUP+T Overview

As the electronic part is packed in 20-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. The operating temperature is extended to around -40°C~85°C TA. In total, 20 terminations have occurred. By its 1 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. There is an electrical component included in the 20 series. The analog switch ics are built using SPDT switching circuits. A 4 circuit is present in this switch device. Use MAX394 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 65Ohm. For details about the functions of 20 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 16V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2.7V. In order to operate this switch device, it would need a current of 100nA. The analogue multiplexer may be damaged if voltage is greater than 60nA. For this switch, a dual supply voltage is feasible, but it must not exceed 8VWith dual power supplies, you should attach at least 2.4V. There are SEPARATE OUTPUT outputs on this analog switch ic. Operating voltages of 8V are compatible with the electrical part.

MAX394EUP+T Features

1 Channels
Switch Circuit: SPDT
100nA Supply Current

MAX394EUP+T Applications

There are a lot of Maxim Integrated MAX394EUP+T Analog Switches & Multiplexers ICs applications.

• Cross Connects
• DSUs
• Channel Banks
• Microprocessor Controlled Analog Systems
• Channelized and Unchannelized DS3 applications
• Voice over IP/DSL – Integrated Access Devices, Smart
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Communication systems
• Relay replacements
• Audio/video switches