MAX398EPE Overview

The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). High reliability is ensured by the advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. 8:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 16. High-quality output is provided by the electronic component's 8 channels. A 5V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the electrical part body. It consists of 1 circuits. Look for analog switch ic variants by searching with MAX398. As far as internal resistance is concerned, it has 100Ohm. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 15V. A low voltage of 3V should be applied to the electronic component. 1μA current would be enough for this multiplexer to operate. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 8V. For dual power supplies, a voltage of at least 3V should be attached. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. Operating voltages range from 12V.

MAX398EPE Features

8 Channels
1μA Supply Current

MAX398EPE Applications

There are a lot of Maxim Integrated MAX398EPE Analog Switches & Multiplexers ICs applications.

• HDTV
• ATM
• Microprocessor controlled systems
• Low-Voltage
• PDAs
• Medical Instrumentation
• MP3 players
• Battery Powered Systems
• Precision instrumentation
• Frame Relay Equipment