MAX410CPA+ Overview

It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifiers op amp ic can be identified by the fact that this is a type of Operational Amplifiers device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 120μV for input offset voltage. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. A supply current of 2.5mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 122dB. There are a total of 1 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 5.25V.

MAX410CPA+ Features

8 Pins
supply voltage of 5V
122dB voltage gain

MAX410CPA+ Applications

There are a lot of Maxim Integrated
MAX410CPA+ Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering