MAX4168EPD+ Overview

There is a DIP case in which the instrumentation amplifier is packaged. An op amp of this type is a OPERATIONAL AMPLIFIER-type. The case in which buffer amplifier is delivered is called a Tube case. There have been a total of 14 terminations over the past year. In total, there are 14 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 5V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifiers-type of devices. A total of 14 pins are present on the instrumentation amplifier. Op amp rates 250μV as input offset voltage. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.3mA and 10 . Maintain 120dB as the voltage gain. On this instrumentation amplifier, there are 2 circuits that are connected together. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. It is recommended that op amp be used at temperatures below 85°C. The operating supply voltage of the buffer op amp is rated at 3.25V. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 6.5V, and this is an excellent feature. To keep the buffer amps' supply voltage higher than 2.7V. You should conduct this electronic component under the dual supply voltage of 3.25V.

MAX4168EPD+ Features

14 Pins
supply voltage of 5V
120dB voltage gain

MAX4168EPD+ Applications

There are a lot of Maxim Integrated MAX4168EPD+ Instrumentational OP Amps applications.

• Computer workstations
• Signal operation
• PDA
• Semiconductor detectors
• Signal amplification
• Biopotential
• Vehicle electronics
• High/low-pass filter circuit
• Medical instruments
• Tablets