MAX4210EEUA+T Overview

Buck boost converter is part of the package Tape & Reel (TR).Voltage regulator is packaged in the way of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).This electronic part is mounted in the way of Surface Mount.A maximum operating temperature of -40°C~85°C should not be exceeded during operation.Current regulator is possible to use a voltage input of 4V~28V for the input.An example of this is the 8 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.Moreover, current regulator is part of the MAX4210 family.In computers and other communication constant current regulators, 8 pins are pronged contacts that form part of a signal interface.The constant current should work as long as it is powered by a 5VV power source, and therefore must be plugged into a 5VV outlet.POWER SUPPLY SUPPORT CIRCUIT is the analog IC in this power converter.The number of channels is growing both strongly and weakly: 1.5.5V's maximum supply voltage can be supported by this buck boost converter.Part Power Management Circuits consists of these current regulations as well as other current regulations.In order for it to operate, 2.7V has to be the minimum supply voltage.The maximum amount of supply current (Isup) required for it to operate reaches a value of 0.67mA.Power is provided by a 3/5V power supply.

MAX4210EEUA+T Features

Tape & Reel (TR) package
MAX4210 family
The maximal supply voltage of 5.5V
3/5V power supplies

MAX4210EEUA+T Applications

There are a lot of Maxim Integrated MAX4210EEUA+T Current Regulation/Managements applications.

• Over-current measurement
• Industrial applications current measurement
• Battery chargers
• Transmission controls
• Diesel injection controls
• Level translating
• Suspension controls
• Battery management
• DC-to-dc converters
• Over-current protection