MAX4376TASA+ Overview

There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. A Current Sense-type buffer amplifier is shown here. In the case of Tube cases, linear amplifier will be delivered. During the past two weeks, there have been close to 8 terminations. In this case, there are 8 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 12V battery. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. An 1mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 26.02dB. 1 channels are available on the instrumentation amplifier.

MAX4376TASA+ Features

8 Pins
supply voltage of 12V
26.02dB voltage gain

MAX4376TASA+ Applications

There are a lot of Maxim Integrated MAX4376TASA+ Instrumentational OP Amps applications.

• earphone
• Communication device
• High-frequency data acquisition systems
• Instrumentation
• Subtraction operation circuits
• Signal amplification
• Proportional operation circuits
• Laptop
• Fission chambers
• Digital cameras