MAX4521EUE+ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. The analog switch ics are built using SPST - NC switching circuits. A total of 4 circuits make up this switch device. Search with MAX4521 if you are looking for analog multiplexer variants. It has an internal resistance of 100Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 2V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 1μA. A digital multiplexer may suffer damage if voltage is applied above 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. In the case of dual power supplies, you should connect at least 2V. There are SEPARATE OUTPUT outputs on this analog switch ic. There is a voltage range of 6V operating voltages for the electrical part. There is also ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY to look out for in this electronic part.

MAX4521EUE+ Features

1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
Additional Features: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY

MAX4521EUE+ Applications

There are a lot of Maxim Integrated
MAX4521EUE+ Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems