MAX4524CUB+ Overview

Presented in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 4:1. Operation at a temperature around 0°C~70°C TA. In total, there have been 10 terminations. A 4 channel electronic part produces high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. There is an electrical component included in the 10 series. Multiplexers built on a SP4T switching circuit are built. It consists of 1 circuits. Try searching with MAX4524 to find analog multiplexer variants. Analog switches have 80Ohm internal resistance. The functions of 10 pins can be found in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Multiplexers should not be powered above 12V in normal situations. A cost-effective Single supply type analogue multiplexer. 2V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 1μA current. Using a single voltage supply, this switch device consumes 2V~12V volts. Drain to Source resistance for this electronic component is 200Ohm.

MAX4524CUB+ Features

4 Channels
Switch Circuit: SP4T
1μA Supply Current
Drain-to-Source resistance: 200Ohm

MAX4524CUB+ Applications

There are a lot of Maxim Integrated MAX4524CUB+ Analog Switches & Multiplexers ICs applications.

• DSUs
• FTTH
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• HDTV
• Power routing
• Residential Gateways, Home Gateway/Router
• Data switching
• Microprocessor Controlled Analog Systems
• Precision data acquisition
• Channel Banks