MAX4526CUA+T Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. An extended operating temperature of 0°C~70°C TA degrees Celsius. In total, 8 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. It is injected into the electrical part body with 8 pins. Circuits based on SPDT switching are used to construct these analog switch ics. The circuits in this analogue multiplexer number 2. Look for analog switch ic variants by searching with MAX4526. A 175Ohm internal resistance characterizes this multiplexer. To find out what the functions of 8 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 36V voltage to the switch device. It is recommended that the electrical component receives a voltage of 4.5V. When the digital multiplexer is charged above 1mA, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 20V. In the case of dual power supplies, you should connect at least 4.5V. An analog IC with the number SPST is integrated into this board. 20V operating voltages can be used with this electrical part.

MAX4526CUA+T Features

1 Channels
Switch Circuit: SPDT

MAX4526CUA+T Applications

There are a lot of Maxim Integrated MAX4526CUA+T Analog Switches & Multiplexers ICs applications.

• SONET
• DSUs
• DSLAMs
• CSU
• Residential Gateways, Home Gateway/Router
• Cable Modem
• Battery Powered Instruments
• Relay replacements
• SONET/SDH ADM
• SDH/SONET multiplexers