MAX4551ESE Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tube. This analog switch is mounted in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. A total of 16 terminations have been recorded. A 4 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. 16 pins are injected to the electronic part body. SPST - NC switching circuits are used in these analog switch ics. Try searching for the analog switch ic with MAX4551 if you are looking for variants. It has an internal resistance of 120Ohm. The datasheets for the 16 pins explain the functions. Multiplexer or Switches is a typical switch device. Multiplexers should not be powered above 6V in normal situations. A analog switch ic that has a cost-effective Dual, Single supply type. There should be 2V voltage fed to the electrical part below 2V. It would be sufficient to run this analogue multiplexer with 1μA current. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. The voltage should be at least 2V if you are using dual power supplies. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.

MAX4551ESE Features

4 Channels
Switch Circuit: SPST - NC
1μA Supply Current

MAX4551ESE Applications

There are a lot of Maxim Integrated MAX4551ESE Analog Switches & Multiplexers ICs applications.

• ATM
• SONET/SDH ADM
• Wireless Local Loop
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• New designs requiring multiplexer functions
• MP3 players
• Data switching
• Channelized and Unchannelized DS3 applications
• Central office
• High-Voltage