MAX4575ESA+ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 8 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There are 8 pins injected into the electronic part body. The analog switch ics are built using SPST - NO switching circuits. A total of 2 circuits make up this switch device. Search with MAX4575 if you are looking for analog multiplexer variants. It has an internal resistance of 120Ohm. The functions of 8 pins can be found in the datasheets. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Single supply type digital switch with a low cost. 2V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 1μA. A voltage of 2V~12V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 1μA. There is a voltage range of 9V operating voltages for the electrical part.

MAX4575ESA+ Features

1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 300MHz

MAX4575ESA+ Applications

There are a lot of Maxim Integrated
MAX4575ESA+ Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems