MAX4602CAE+T Overview

The electrical component comes in 16-SSOP (0.209, 5.30mm Width) packaging, which makes it convenient to ship overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 1:1. Extended operating temperature around 0°C~70°C TA. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 1 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. This electronic part can be found in the 16 series. Unlike digital switches, these are based on SPST - NO switching circuits. There are 4 circuits in this multiplexer. Using the MAX4602 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 2.5Ohm. Datasheets for 16 pin functions are available upon request. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 36V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 4.5V. Put voltage above 500nA on the multiplexer to cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. It is recommended that you attach at least 4.5V to your dual power supply. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. There is a voltage range of 20V operating voltages for the electrical part.

MAX4602CAE+T Features

1 Channels
Switch Circuit: SPST - NO

MAX4602CAE+T Applications

There are a lot of Maxim Integrated MAX4602CAE+T Analog Switches & Multiplexers ICs applications.

• Audio signal routing
• DVD-R
• Battery-powered systems
• PDH Multiplexers
• Communication systems
• Signal routing between systems
• Microprocessor Controlled Analog Systems
• Microwave transmission systems
• Isolation
• ATM