MAX4613CUE+T Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operation at a temperature around 0°C~70°C TA. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. Electronic part bodies are injected with 16 pins. The analog switch ics are built using SPST - NO/NC switching circuits. The multiplexer consists of 4 circuits. Using the MAX4613 search parameter, you can discover variants of the switch. It has an internal resistance of 70Ohm. Datasheets for 16 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 40V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended to use 4.5V as the lowest voltage for the electrical part. It would be sufficient to run this analogue multiplexer with 1μA current. The analogue multiplexer may be damaged if voltage is greater than 1μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. If you are using a dual power supply, you should attach at least 4.5V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. 18V operating voltages are supported by the electronic component.

MAX4613CUE+T Features

1 Channels
Switch Circuit: SPST - NO/NC
1μA Supply Current

MAX4613CUE+T Applications

There are a lot of Maxim Integrated MAX4613CUE+T Analog Switches & Multiplexers ICs applications.

• HDTV
• Communication systems
• High-Voltage
• Residential Gateways, Home Gateway/Router
• Fiber to the Home
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• ISDN NT1/TA
• Cellular phones
• FTTH
• Industrial