MAX4615CPD Overview

Shipping overseas is convenient with the electronic component packed in 14-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around 0°C~70°C TA are extended for operation. Total terminations are 14. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 3.3V volts, the electrical component should be turned on and run. The electronic part body is injected with 14 pins. A SPST - NC switching circuit is used to build these analog multiplexers. There are 4 circuits in this multiplexer. Try searching with MAX4615 if you're looking for variants. There is 10Ohm internal resistance in this digital multiplexer. For functions related to 14 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. 2V should be the lowest voltage fed to the electronic component. This analog switch requires a voltage of 2V~5.5V to drain from a single voltage supply. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Additional features of the electronic component include: CAN ALSO OPERATE WITH 5 V SUPPLY.

MAX4615CPD Features

1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 70MHz
Additional Features: CAN ALSO OPERATE WITH 5 V SUPPLY

MAX4615CPD Applications

There are a lot of Maxim Integrated
MAX4615CPD Analog Switches & Multiplexers ICs applications.

• Transmit
• Low-Voltage
• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems