SPDT 45Ohm Analog Switches MAX4649 8 Pins 2nA 15V SOT-23-8
SOT-23
MAX4649EKA+T Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Contact Plating
Gold
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
SOT-23-8
Number of Pins
8
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2001
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Resistance
45Ohm
Additional Feature
CAN ALSO OPERATE FROM SINGLE SUPPLY OF 9V TO 36V
Max Power Dissipation
714mW
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
15V
Terminal Pitch
0.65mm
[email protected] Reflow Temperature-Max (s)
30
Base Part Number
MAX4649
Pin Count
8
Operating Supply Voltage
20V
Polarity
Non-Inverting
Number of Channels
1
Number of Circuits
1
Max Supply Voltage
36V
Min Supply Voltage
9V
Operating Supply Current
1μA
Nominal Supply Current
38μA
Max Supply Current
75μA
Number of Bits
2
Turn On Delay Time
130 ns
Voltage - Supply, Single/Dual (±)
9V~36V ±4.5V~20V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
130 ns
Max Dual Supply Voltage
20V
On-State Resistance (Max)
45Ohm
Min Dual Supply Voltage
4.5V
High Level Output Current
30mA
Multiplexer/Demultiplexer Circuit
2:1
Off-state Isolation-Nom
92 dB
Current - Leakage (IS(off)) (Max)
2nA
Channel Capacitance (CS(off), CD(off))
6pF
On-state Resistance Match-Nom
5Ohm
Switch Circuit
SPDT
Charge Injection
2pC
Channel-to-Channel Matching (ΔRon)
600m Ω
Crosstalk
-92dB @ 1MHz
Drain to Source Resistance
45Ohm
Height
1.3mm
Length
3mm
Width
1.75mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
2,500
$1.80000
$3.6
MAX4649EKA+T Product Details
MAX4649EKA+T Overview
Presented in SOT-23-8, this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -40°C~85°C TA. A total of 8 terminations have been recorded. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. Electronic part bodies are injected with 8 pins. Unlike digital switches, these are based on SPDT switching circuits. The circuits in this analogue multiplexer number 1. Try searching with MAX4649 to find analog multiplexer variants. An switch multiplexer with 45Ohm internal resistance has a value of 45Ohm. The datasheets for the 8 pins explain the functions. Multiplexers should not be powered above 36V in normal situations. Dual, Single supply type digital switch with a low cost. 9V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 1μA current. The analogue multiplexer may be damaged if voltage is greater than 75μA. For this switch, a dual supply voltage is feasible, but it must not exceed 20VFor dual power supplies, a voltage of at least 4.5V should be attached. There is a voltage range of 20V operating voltages for the electrical part. You shouldn't miss the additional features of the electrical component, such as: CAN ALSO OPERATE FROM SINGLE SUPPLY OF 9V TO 36V. A Drain to Source resistance of 45Ohm is shown for this electronic part. Its conductivity is 2-bit.
MAX4649EKA+T Features
1 Channels Switch Circuit: SPDT 1μA Supply Current Additional Features: CAN ALSO OPERATE FROM SINGLE SUPPLY OF 9V TO 36V Drain-to-Source resistance: 45Ohm 2-Bit
MAX4649EKA+T Applications
There are a lot of Maxim Integrated MAX4649EKA+T Analog Switches & Multiplexers ICs applications.