MAX4655EUA+ Overview

Shipping overseas is convenient due to the electrical component's packing in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. A switch device like this is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there have been 8 terminations. A electrical component with 1 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. An injection of 8 pins is performed into the body of the electrical component. Circuits based on SPST - NC switching are used to construct these analog switch ics. The multiplexer consists of 1 circuits. Using the MAX4655 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 10Ohm. To find out what the functions of 8 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 40V voltage to the switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 9V should be the lowest voltage fed to the electronic component. When the digital multiplexer is charged above 150μA, damage can occur. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. The voltage should be at least 4.5V if you are using dual power supplies. 20V operating voltages can be used with this electrical part.

MAX4655EUA+ Features

1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 210MHz

MAX4655EUA+ Applications

There are a lot of Maxim Integrated MAX4655EUA+ Analog Switches & Multiplexers ICs applications.

• E1 Network Equipment
• Mechanical reed relay replacement
• Signal routing between systems
• Avionics test equipment
• Communication systems
• SONET/SDH ADM
• Medical systems
• PDH Multiplexers
• Microwave transmission systems
• Sample hold systems