MAX4700EWE Overview

Packed in 16-SOIC (0.295, 7.50mm Width), the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. An injection of 16 pins is performed into the body of the electrical component. Multiplexers built on a SPST - NO/NC switching circuit are built. It consists of 2 circuits. Try searching for the analog switch ic with MAX4700 if you are looking for variants. In this multiplexer, the internal resistance is 1.25Ohm. For functions related to 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 36V to a switch device. 4.5V should be the lowest voltage fed to the electronic component. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 4.5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.

MAX4700EWE Features

1 Channels
Switch Circuit: SPST - NO/NC

MAX4700EWE Applications

There are a lot of Maxim Integrated MAX4700EWE Analog Switches & Multiplexers ICs applications.

• Access Concentrators
• Precision data acquisition
• Private Branch Exchange (PBX)
• T1/E1 Terminals
• Audio and video switching
• Mechanical reed relay replacement
• Audio/video switches
• Battery Powered Instruments
• SDH
• Avionics