MAX4704EGC+T Overview

Packed in 12-VFQFN Exposed Pad, the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 4:1. Increasing operating temperature to around -40°C~85°C TA. In total, there have been 12 terminations. The electronic part provides high-quality output because it has 4 channels. With a 3V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 12 series. SP4T switching circuits are used in these analog switch ics. There are 1 circuits in this switch device. Try searching for the analog switch ic with MAX4704 if you are looking for variants. A 60Ohm internal resistance characterizes this multiplexer. The functions of 12 pins can be found in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. A cost-effective Single supply type analogue multiplexer. 1.8V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 1μA current. Using a single voltage supply, this switch device consumes 1.8V~5.5V volts. There is a voltage range of 5V operating voltages for the electrical part. There are 200MHz bandwidths for data transfer.

MAX4704EGC+T Features

4 Channels
Switch Circuit: SP4T
1μA Supply Current
Bandwidth: 200MHz

MAX4704EGC+T Applications

There are a lot of Maxim Integrated MAX4704EGC+T Analog Switches & Multiplexers ICs applications.

• E1 Network Equipment
• Medical systems
• Microprocessor Controlled Analog Systems
• Audio signal routing
• Avionics test equipment
• Cross Connects
• Sample-and-hold systems
• SDH/SONET multiplexers
• RGB switches
• Voice over IP/DSL – Integrated Access Devices, Smart