MAX4711ESE Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~85°C TA. Total terminations are 16. By its 1 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. The electrical component body receives 16 pins. The analog switch ics are built using SPST - NC switching circuits. The circuits in this analogue multiplexer number 4. Try searching with MAX4711 to find analog multiplexer variants. As far as internal resistance is concerned, it has 25Ohm. Datasheets for 16 pin functions are available upon request. Multiplexer or Switches is a typical switch device. An abnormal situation would be for the switch device to be supplied with a voltage greater than 11V. 2.7V should be the lowest voltage fed to the electronic component. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5.5V. The voltage should be at least 2.7V if you are using dual power supplies. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Additional features of the electronic component include: CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V.

MAX4711ESE Features

1 Channels
Switch Circuit: SPST - NC
Additional Features: CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V

MAX4711ESE Applications

There are a lot of Maxim Integrated MAX4711ESE Analog Switches & Multiplexers ICs applications.

• Intelligent PBX
• Isolation
• SDH/SONET multiplexers
• Frame Relay Equipment
• SONET/SDH ADM
• Medical
• PDAs
• Automatic test equipment
• Audio and video signal routing
• Digital cross connects (DSX-1)