CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V
Subcategory
Multiplexer or Switches
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
4
Supply Voltage
5V
Terminal Pitch
1.27mm
[email protected] Reflow Temperature-Max (s)
20
Base Part Number
MAX4713
Output
SEPARATE OUTPUT
Pin Count
16
Power Supplies
3/5/+-5V
Number of Channels
1
Number of Circuits
4
Max Supply Voltage
11V
Min Supply Voltage
2.7V
Voltage - Supply, Single/Dual (±)
2.7V~11V ±2.7V~5.5V
Neg Supply Voltage-Nom (Vsup)
-5V
Max Dual Supply Voltage
5.5V
On-State Resistance (Max)
25Ohm
Min Dual Supply Voltage
2.7V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
59 dB
Current - Leakage (IS(off)) (Max)
500pA
Channel Capacitance (CS(off), CD(off))
8pF 8pF
On-state Resistance Match-Nom
0.2Ohm
Switch Circuit
SPST - NO/NC
Switch Time (Ton, Toff) (Max)
125ns, 80ns
Charge Injection
25pC
Channel-to-Channel Matching (ΔRon)
200m Ω
Crosstalk
-87dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
125ns
Switch-off Time-Max
80ns
Height Seated (Max)
1.75mm
Length
9.9mm
Width
3.9mm
Radiation Hardening
No
RoHS Status
Non-RoHS Compliant
MAX4713CSE Product Details
MAX4713CSE Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tube is used. Surface Mount is where this multiplexer is located. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around 0°C~70°C TA. In total, 16 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the electrical part body. Based on SPST - NO/NC switching circuits, these analog multiplexers work. This multiplexer is composed of 4 circuits. MAX4713 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 25Ohm. For details about the functions of 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 11V voltage to the switch device. There should be 2.7V voltage fed to the electrical part below 2.7V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5.5V. It is recommended that you attach at least 2.7V to your dual power supply. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. You shouldn't miss the additional features of the electrical component, such as: CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V.
MAX4713CSE Features
1 Channels Switch Circuit: SPST - NO/NC Additional Features: CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V
MAX4713CSE Applications
There are a lot of Maxim Integrated MAX4713CSE Analog Switches & Multiplexers ICs applications.