MAX4734EGC+T Overview

Presented in 12-VFQFN Exposed Pad, this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 4:1. Operation at a temperature around -40°C~85°C TA. Total terminations are 12. A 4 channel electronic part produces high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. A key feature of the 12 series is the inclusion of this electronic part as part of its design. Unlike digital switches, these are based on SP4T switching circuits. The circuits in this analogue multiplexer number 1. Try searching with MAX4734 to find analog multiplexer variants. There is 800mOhm internal resistance in this digital multiplexer. For details about the functions of 12 pins, please refer to the datasheets. Users should never supply a voltage higher than 3.6V to a switch device. Analogue multiplexer with a Single supply type that is cost-effective. It is recommended that the electrical component receives a voltage of 1.6V. For this multiplexer to operate, 1μA current would be sufficient. An analogue multiplexer drains from a single voltage supply at 1.6V~3.6V. The electrical part can be operated at 3V voltage levels. There are various bandwidths available for data transfer.

MAX4734EGC+T Features

4 Channels
Switch Circuit: SP4T
1μA Supply Current
Bandwidth: 90MHz

MAX4734EGC+T Applications

There are a lot of Maxim Integrated MAX4734EGC+T Analog Switches & Multiplexers ICs applications.

• Digital cross connects (DSX-1)
• Video signal routing
• Digital Cross-Connects
• SDH/SONET multiplexers
• Automotive applications
• SONET
• Relay Replacement
• PBX interfaces
• Audio/video switches
• Battery-powered systems