80ns, 40ns SPST - NO 4.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4737 14 Pins 500pA 3V 14-TSSOP (0.173, 4.40mm Width)
SOT-23
MAX4737EUD+ Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
14-TSSOP (0.173, 4.40mm Width)
Number of Pins
14
Operating Temperature
-40°C~85°C TA
Packaging
Tube
Published
2004
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
14
ECCN Code
EAR99
Resistance
4.5Ohm
Terminal Finish
Matte Tin (Sn)
Subcategory
Multiplexer or Switches
Max Power Dissipation
500mW
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
3V
Terminal Pitch
0.65mm
Time@Peak Reflow Temperature-Max (s)
30
Base Part Number
MAX4737
Output
SEPARATE OUTPUT
Pin Count
14
Operating Supply Voltage
5V
Number of Channels
1
Number of Circuits
4
Max Supply Voltage
5.5V
Min Supply Voltage
1.8V
Operating Supply Current
1μA
Nominal Supply Current
1μA
Max Supply Current
1μA
Throw Configuration
SPST
Turn On Delay Time
100 ns
Data Rate
12 Mbps
Supply Type
Single
Bandwidth
300MHz
Turn-Off Delay Time
50 ns
On-State Resistance (Max)
4.5Ohm
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
55 dB
Current - Leakage (IS(off)) (Max)
500pA
Channel Capacitance (CS(off), CD(off))
9pF
On-state Resistance Match-Nom
0.1Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
80ns, 40ns
Charge Injection
5pC
Channel-to-Channel Matching (ΔRon)
100m Ω
Crosstalk
-110dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
80ns
Voltage - Supply, Single (V+)
1.8V~5.5V
Normal Position
NO
Height
950μm
Length
5.1mm
Width
4.5mm
Radiation Hardening
No
REACH SVHC
Unknown
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$4.432107
$4.432107
10
$4.181233
$41.81233
100
$3.944559
$394.4559
500
$3.721283
$1860.6415
1000
$3.510644
$3510.644
MAX4737EUD+ Product Details
MAX4737EUD+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 14-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tube is used to provide high reliability. Surface Mount is where this multiplexer is located. 1:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 14. The electronic part provides high-quality output because it has 1 channels. When a voltage supply of 3V is used, the electronic component should be turned on and run. As part of the design of the 14 series, this electronic part has been incorporated into the system. Circuits based on SPST - NO switching are used to construct these analog switch ics. The multiplexer consists of 4 circuits. Try searching for the analog switch ic with MAX4737 if you are looking for variants. An switch multiplexer with 4.5Ohm internal resistance has a value of 4.5Ohm. Datasheets for 14 pin functions are available upon request. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 5.5V to a switch device. Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 1.8V. For this digital switch to work, 1μA current would suffice. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. A digital multiplexer may suffer damage if voltage is applied above 1μA. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. It can operate from 5V operating voltages. The transfer of data can be performed over 300MHz bandwidths.
MAX4737EUD+ Features
1 Channels Switch Circuit: SPST - NO 1μA Supply Current Bandwidth: 300MHz
MAX4737EUD+ Applications
There are a lot of Maxim Integrated MAX4737EUD+ Analog Switches & Multiplexers ICs applications.