MAX4742EUA+ Overview

This electronic part is conveniently packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 8. The electronic part delivers high-quality output through its 1 channels. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. An electrical component like this is included in the 8 series. SPST - NC switching circuits are used in these analog switch ics. This multiplexer is composed of 2 circuits. Using the MAX4742 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 800mOhm. You can find the functions of the 8 pins in the datasheets. It is generally not recommended to supply a voltage higher than 3.6V to the switch device in normal circumstances. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 1.6V. It would be sufficient to run this analogue multiplexer with 200nA current. A voltage of 1.6V~3.6V is required to drain this analog switch from a single voltage supply. Putting voltage greater than 200nA on the multiplexer may cause damage.

MAX4742EUA+ Features

1 Channels
Switch Circuit: SPST - NC
200nA Supply Current
-3db Bandwidth: 100MHz

MAX4742EUA+ Applications

There are a lot of Maxim Integrated MAX4742EUA+ Analog Switches & Multiplexers ICs applications.

• Isolation
• DVD-R
• Access Concentrators
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Microprocessor controlled systems
• RGB switches
• Digital cross connects (DSX-1)
• Power routing
• 65 V DACs
• Intelligent PBX