85ns, 45ns SPDT 25Ohm QUAD Analog Switches BREAK-BEFORE-MAKE MAX4750 16 Pins 3V 16-WQFN Exposed Pad
SOT-23
MAX4750ETE+T Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-WQFN Exposed Pad
Number of Pins
16
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2012
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
ECCN Code
EAR99
Resistance
50Ohm
Terminal Finish
Matte Tin (Sn)
Subcategory
Multiplexer or Switches
Max Power Dissipation
1.349W
Technology
CMOS
Terminal Position
QUAD
Peak Reflow Temperature (Cel)
260
Number of Functions
2
Supply Voltage
3V
Terminal Pitch
0.8mm
Base Part Number
MAX4750
Output
SEPARATE OUTPUT
Pin Count
16
Operating Supply Voltage
9V
Power Supplies
3/5V
Number of Channels
1
Number of Circuits
2
Max Supply Voltage
11V
Min Supply Voltage
2V
Operating Supply Current
1μA
Nominal Supply Current
100pA
Max Supply Current
1μA
Turn On Delay Time
150 ns
Supply Type
Single
Turn-Off Delay Time
60 ns
-3db Bandwidth
250MHz
On-State Resistance (Max)
25Ohm
Multiplexer/Demultiplexer Circuit
2:1
Off-state Isolation-Nom
72 dB
Channel Capacitance (CS(off), CD(off))
20pF 20pF
On-state Resistance Match-Nom
0.2Ohm
Switch Circuit
SPDT
Switch Time (Ton, Toff) (Max)
85ns, 45ns
Charge Injection
9pC
Channel-to-Channel Matching (ΔRon)
100m Ω
Crosstalk
-84dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)
2V~11V
Height Seated (Max)
0.8mm
Length
5mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
MAX4750ETE+T Product Details
MAX4750ETE+T Overview
The electrical component comes in 16-WQFN Exposed Pad packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 2:1. Operation at a temperature around -40°C~85°C TA. A total of 16 terminations have been recorded. By its 1 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. As part of its design, the 16 series is equipped with this electronic component. Unlike digital switches, these are based on SPDT switching circuits. There are 2 circuits in this switch device. Search with MAX4750 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 50Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In a normalsituation, users should not supply the switches with voltage higher than 11V. Analog switch ics with Single supply type are cost-effective. There should be 2V voltage fed to the electrical part below 2V. For this digital switch to work, 1μA current would suffice. Using only a single voltage supply, this analog switch requires 2V~11V voltage. Putting voltage greater than 1μA on the multiplexer may cause damage. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. 9V operating voltages are supported by the electronic component.