Shipping overseas is convenient due to the electrical component's packing in 16-WFBGA, CSPBGA. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 2:1. Operational temperature extended around -40°C~85°C TA. 16 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Multiplexers built on a SPDT switching circuit are built. It consists of 4 circuits. Try searching for the analog switch ic with MAX4754 if you are looking for variants. As far as internal resistance is concerned, it has 850mOhm. To find out what the functions of 16 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. An effective Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 1.8V. This digital switch can be operated with a current of 6.5μA. This analogue multiplexer requires a voltage of 1.8V~5.5V when it drains from a single voltage supply. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.