MAX483CUA+ Overview

LED drivers with the enhanced 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package will be able to drive a variety of common LEDs with ease.There is a Tube package for this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver requires a 4.75V~5.25V power supply.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are 0°C~70°C.This line driver ic can operate efficiently with a supply voltage range of 5V.Integrated into this wide receiver are 8 terminations that are used for driving and receiving signals from data.ICs that are packaged with market standard pinouts are available on the market.Since the part number MAX483 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation control is provided by this 8-pin driver IC.There is a capability of 1-bit resolution with this ic receiver.There are typically 1 bits of resolution specified in the specifications of this receiver.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.This driver IC is designed to operate from a 5V power supply.To power the ic receiver, sufficient current but not more than 0.65mA should be supplied to its VCC pin.

MAX483CUA+ Features

Tube package
8 pin count
8 pins
5V power supply

MAX483CUA+ Applications

There are a lot of Maxim Integrated MAX483CUA+ Drivers/Receivers/Transceivers applications.

• Carrier phase observations
• Gigabit Ethernet
• Data center
• Indoor ad hoc meeting
• Car alarm systems
• transmission relay
• Car radio
• Precision geodetic measurement
• Vehicle
• Wireless projection application for conferences