Driver ICs with enhanced 8-DIP (0.300, 7.62mm) packages are excellent for driving LEDs with common characteristics.In the Tube package, this receiver is mounted.The Transceiver can transceiver type enables this part to be used in a wide range of applications.Ideally, you should place this wide receiver on a Through Hole-type PCB or development board.Power supply requirements for this differential driver are 4.75V~5.25V.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.This line driver ic can operate efficiently with a supply voltage range of 5V.This wide receiver has 8 terminations for driving and receiving data signals.This transceiver is packaged with 8 market standard pinoutsSince the part number MAX485 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.This is a 8-pin driver IC with enhanced power dissipation control.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Through Hole mounting technologies.It was possible to achieve a 1-bit resolution through this ic receiver.This receiver is typically specified with a resolution of 1 bits. There are two types of input voltage supply available for this IC, 5V.Line Driver or Receivers is a subcategory of this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.In total, there are 1 transceivers implemented by this module isolated transceiver.The device is capable of delivering voltage at 3V.
MAX485ECPA+ Features
Tube package 8 pin count 8 pins 5V power supply
MAX485ECPA+ Applications
There are a lot of Maxim Integrated MAX485ECPA+ Drivers/Receivers/Transceivers applications.