Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MAX485ECSA+

MAX485ECSA+

MAX485ECSA+

Maxim Integrated

8 Terminations5V 8 Pin MAX485 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

SOT-23

MAX485ECSA+ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 6 Weeks
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 540.001716mg
Operating Temperature 0°C~70°C
Packaging Tube
Published 1996
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Transceiver
Subcategory Line Driver or Receivers
Max Power Dissipation 471mW
Technology CMOS
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number MAX485
Pin Count 8
Output Voltage 3V
Max Output Current 250mA
Operating Supply Voltage 5V
Power Supplies 5V
Interface RS-422, RS-485
Operating Supply Current 500μA
Nominal Supply Current 500μA
Propagation Delay 60 ns
Data Rate 2.5Mbps
Differential Output YES
Output Polarity COMPLEMENTARY
Protocol RS422, RS485
Input Characteristics DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers 1/1
Driver Number of Bits 1
Receiver Number of Bits 1
Duplex Half
Receiver Hysteresis 70mV
Number of Transceivers 1
Receive Delay-Max 200 ns
Simplex/Duplex Half Duplex
Height 1.75mm
Length 5mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $2.52000 $2.52
10 $2.26500 $22.65
25 $2.14080 $53.52
100 $2.07600 $207.6
MAX485ECSA+ Product Details

MAX485ECSA+ Overview


LED drivers benefit from this IC's enhanced 8-SOIC (0.154, 3.90mm Width) package.The Tube package contains this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.On any Surface Mount-type PCB or development board, you can install this wide receiver.In terms of power supply, this differential driver utilizes 4.75V~5.25V.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.IC receiver has been designed primarily for applications operating at 0°C~70°C.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.There are 8 terminations in this wide receiver so that signals can be driven from the data and received.There are 8 pinouts available on this transceiver which are market standard.This part number MAX485 can be used to search for more variants based on the product type, temperature, package, etc.An enhanced power dissipation driver IC with 8 pins.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.It was possible to achieve a 1-bit resolution through this ic receiver.There is usually a 1-bit resolution specified for this receiver when it is used.There is a 5V input voltage supply that can be used to operate this transceiver module.Line Driver or Receivers is a subcategory of this rf transceiver module.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.There are 1 transceivers in total implemented by this IC.With this integrating circuit you can drive LEDs of a voltage of up to 500μA. It can be used to drive large displays.In addWide receiverion to delivering voltage at 3V, Wide receiver also has the abilWide receivery to measure voltage.

MAX485ECSA+ Features


Tube package
8 pin count
8 pins
5V power supply

MAX485ECSA+ Applications


There are a lot of Maxim Integrated MAX485ECSA+ Drivers/Receivers/Transceivers applications.

  • Wired telephone
  • Wireless multimedia center in smart home
  • Clock radio
  • Metro access rings
  • Vehicle
  • Ethernet circuitry
  • Wireless transmission
  • Desktop PC
  • IP cameras
  • Routers

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News