MAX4864LELT+ Overview

The Strip package houses this receiver.This line driver ic can operate efficiently with a supply voltage range of 5V.The integrated terminations of this wide receiver allow it to drive and receive signals from data.An enhanced power dissipation control is provided by this 6-pin driver IC.A subcategory named Power Management Circuits can be used to group this rf transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.It is important that the operating transceiver module's temperature is below 85°C.It must not be less than -40°C degrees Celsius for this optical transceiver to operate properly.Additionally, this optical transceiver module features the PRESET OVERVOLTAGE THRESHOLD IS 7.4V function, which improves the stability and accuracy of signal management in general.In order to get the best performance, this transceiver module should be handled with a voltage lower than 28V.The voltage supply should be at least 1.2V for this module isolated transceiver to operate.This optical transceiver is embedded with 1 channels in total.

MAX4864LELT+ Features

Strip package
6 pins
5V power supply
1 channels

MAX4864LELT+ Applications

There are a lot of Maxim Integrated MAX4864LELT+ Drivers/Receivers/Transceivers applications.

• Changeing the frequency from IF to RF
• Cordless telephone
• Satellite communication
• Indoor ad hoc meeting
• Remote controls
• Fast Ethernet
• IP cameras
• Metro access rings
• Switches
• Wired telephone