MAX4992EVB+ Overview

A high level of reliability can be achieved through the use of an advanced packaging method Tube. In total, 10 terminations have occurred. Due to its 1 channels, the electrical component produces high-quality output. An 2.7V voltage supply should allow the electrical part to be turned on and run. There are 10 pins injected into the electronic part body. In this multiplexer, the internal resistance is 500mOhm. Please refer to the datasheets for 10 pins functions. The analog multiplexer shown here is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. A cost-effective Single supply type analogue multiplexer. A low voltage of 1.8V should be applied to the electronic component. Putting voltage greater than 6μA on the multiplexer may cause damage. There are SEPARATE OUTPUT outputs on this analog switch ic. Temperatures over 85°C should not be allowed for the multiplexer to operate.

MAX4992EVB+ Features

1 Channels

MAX4992EVB+ Applications

There are a lot of Maxim Integrated MAX4992EVB+ Analog Switches & Multiplexers ICs applications.

• HDTV
• Battery Powered Systems
• Communication systems
• ISDN NT1/TA
• Audio and video switching
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Data switching
• Transmit
• Industrial
• Remote Powered Equipment