MAX5033BUSA+ Overview

There is an optimized performance in this voltage regulator because it utilizes the Tube package. There are 8 terminations in this voltage regulator. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. Space savings are achieved by placing this voltage regulator in the 8-SOIC (0.154, 3.90mm Width) package. A total of 1 outputs are configured in this voltage regulator. On the output pins of this DC DC switching regulator, there is a Fixed output generated. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. Operating at 0°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. DC-DC switching regulators reach 125kHz switching frequencies. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 7.5V. The maximum input voltage of this voltage regulator 12v is 76V. Its 260 peak reflow temperature makes this regulator essentially indestructible. An input voltage of 12V is required for switching regulator operation. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. In this case, the DC/DC regulator belongs to the family MAX5033. Voltage regulator is capable of giving voltage at 5V volts. There are 8 pins that are used for the operation of the voltage regulator 12v. For this switching regulator, we recommend keeping the output voltage at at least 5V volts. A maximum output current of 500mA A is available to meet the switching regulator operation requirements. A maximum voltage of 5V can be obtained from the regulator voltage. Switching regulators with the PFM CONTROL TECHNIQUE ALSO POSSIBLE feature are more efficient and stable.

MAX5033BUSA+ Features

1 outputs
Peak reflow temperature (Cel) of 260
8 pins
PFM CONTROL TECHNIQUE ALSO POSSIBLE

MAX5033BUSA+ Applications

There are a lot of Maxim Integrated MAX5033BUSA+ Voltage Regulators applications.

• Linear guide
• ATMs
• Arc suppression circuits
• Experimental setup
• Plate bending machines
• Wind power
• Sink circuits
• Direct power supply system
• Grinders
• Analog precision reference circuits