MAX5037ETH-T Overview

Capsuled in the 44-WFQFN Exposed Pad package, the switching controller suits most application needs. 2 outputs can be generated with the dc motor controller. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. A total of Transistor Driver dc switching's outputs can be handled by it. The supply and operating voltage of the dc control are 4.75V~28V. Work well in dc switchers with a -40°C~85°C TA. In this switching controller, the switch can be set to 250kHz 500kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Phase Control, Power Good. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. A switching converters's terminal (s) sits at the QUAD position. Different dc switching's functions can be applied to 44 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. In addition to "MAX5037", there are other relevant dc to dc converter ics you can find. In total, switching converter has 44 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. 4.75V should be the minimum input voltage for the dc dc voltage regulator. Test statistics indicate DC regulator outputs 1.85V voltage. A maximum voltage of 5.5V is accepted by the dc to dc regulator as an input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 4A. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 28V.

MAX5037ETH-T Features

Transistor Driver Outputs
Switching Frequency: 250kHz 500kHz
Enable, Phase Control, Power Good
PULSE WIDTH MODULATION

MAX5037ETH-T Applications

There are a lot of Maxim Integrated MAX5037ETH-T DC to DC converter applications.

• Large fire protection systems
• Injection molding machinery
• Printing equipment
• Magnetohydrodynamic power
• Energy management systems
• Precision electronic equipment
• Nuclear power plants
• Thermal power
• Electric heating, lighting
• CMM