MAX5069AAUE+ Overview

As a result of 16-TSSOP (0.173, 4.40mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. This dc motor controller can be used to generate outputs with 1 numbers. The pmic is packaged in Tube solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 10.8V~24V are the dc control's supply voltage and operating voltage, respectively. A -40°C~125°C TJ dc switcher is not a problem. In this switching controller, the switch can be set to 50kHz~2.5MHz. Surface Mount makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Dead Time Control, Enable, Frequency Control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. switching converters terminal (s) are designed to be at DUAL. Various 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. MAX5069 can be searched for other relevant dc to dc converter ics. There are 16 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1A. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. Switching controller operates at 2.5MHz Hz. To run the voltage regulator dc to dc safely and reliably, users should apply 72V to the voltage regulator dc to dc. It is possible to set the input voltage as 23.6V for nominal working statuses.

MAX5069AAUE+ Features

Transistor Driver Outputs
Switching Frequency: 50kHz~2.5MHz
Dead Time Control, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 2.5MHz

MAX5069AAUE+ Applications

There are a lot of Maxim Integrated MAX5069AAUE+ DC to DC converter applications.

• Wide-range voltage regulation circuits
• Elevator lighting
• Power supplies of electronic gadgets
• seismic instrument power circuits
• Gear/thread machining machines
• Electric heating, lighting
• Sink circuits
• Laboratories
• Printing equipment
• Milling machines