MAX5930AEEG+ Overview

In the 24-SSOP (0.154, 3.90mm Width) package you will find it.Channel 3 is currently available.A Tube-shaped package holds it.The 20 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 20 pins.The supply voltage 3.3V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller, Sequencer.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for General Purpose are available on the device.A feature of Fault Timeout describes it.Using a 1V~15VV power source should be able to power the device.The MAX5930 family includes it.During operation, 24 pins are used.Hot-swappable device has Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, UVLO programmable features.Presently, there is a sufficient supply of 2.5mA.As you can see, it is positioned in the direction of Surface Mount.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 1V so that the device can function normally.Vsup is set to 15V, the maximum supply voltage.Part 1/15V is associated with power supplies.The maximum supply current it requires to operate is 5mA.There is an electrical component in this series called VariableSpeed/BiLevel™.

MAX5930AEEG+ Features

The terminal position of 20
Features of Fault Timeout
Programmable features of Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, UVLO
VariableSpeed/BiLevel™ series

MAX5930AEEG+ Applications

There are a lot of Maxim Integrated
MAX5930AEEG+ hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems