MAX6126AASA41+T Overview

Uses the handy 8-SOIC (0.154, 3.90mm Width) package.This part serves as a voltage reference and is controlled by a Series signal.The external packaging contains Tape & Reel (TR).There are different types of functions that end with 8.In order to measure voltage accurately, a tolerance of ±0.02% must be used.It is coupled to an analog IC THREE TERMINAL VOLTAGE REFERENCE.In order to determine the output voltage 4.096V, test statistics are used.There is 1 need to change the output to 1.Input can be entered via a Fixed form.The part includes pins 8.Reflow soldering shouldn't exceed 260.Surface Mount can be used to make the PCB design more demanding.The voltage reference circuit can be used within the range of -40°C~125°C TA.Searching for "MAX6126" will yield other relevant parts.There is Surface Mount suitable application for Surface Mount.It is impossible to expect the voltage reference ic to output more current than 10mA in this case.A high-quality communication channel is not available at the moment.The maximum input voltage for this part is 13V, which means that voltage input should be limited accordingly.In order for it to work, you must supply a voltage of 5V.For it to be powered, a voltage of 4.3V must be provided.In most cases, the voltage reference circuit can supply voltage inputs of 4.3V~12.6V volts.At idle, the part uses 550μA.There is a supply current called 725μA that is used to operate the voltage reference ic.

MAX6126AASA41+T Features

±0.02% Tolerance
THREE TERMINAL VOLTAGE REFERENCE Analog IC
Peak Reflow Temperature: 260
Channel Number: 1
Max Output Voltage: 13V
Current Supply: 725μA

MAX6126AASA41+T Applications

There are a lot of Maxim Integrated
MAX6126AASA41+T Voltage Reference applications.

• High resolution converters
• Industrial process control systems
• Precision instruments
• Notebook Computers
• Cell Phones
• Industrial Process Control
• High-Resolution Analog-to-Digital
• and Digital-to-Analog Converters
• High-Accuracy Reference Standard
• High-Accuracy Industrial and Process Control