MAX6314US26D3+T Overview

It is mounted through 4 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. In this IC management you will find TO-253-4, TO-253AA functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 4 pins on the board. The pins of the power management system count 4. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Bidirectional during operation. It is estimated that the voltage supervisor's supply current is 5μA. A similar IC managements number of the manufacturer can always be found by using MAX6314, the base power ics number.

MAX6314US26D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
5μA operating supply current

MAX6314US26D3+T Applications

There are a lot of Maxim Integrated MAX6314US26D3+T Voltage Supervisors applications.

• Electrical fire monitoring system
• Battery cars
• Automotive permanent magnet synchronous motors
• Household appliances
• Low voltage/high power - AI, GPU
• Satellite navigation
• Dash board
• Power communication system
• Set top box
• Precision measurement