MAX6318MHUK46CY-T Overview

There are 5 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. IC management is packaged as a SC-74A, SOT-753 package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 245. The supervisor is always powered by a 3V volt supply. Power management conducts at a voltage of 1. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 5 pins. There are 5 pins on the supervisor. Supply voltage (Vsup) should be at least 1V for this power management. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Bi-Directional. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6318, which is the base power ics number.

MAX6318MHUK46CY-T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

MAX6318MHUK46CY-T Applications

There are a lot of Maxim Integrated MAX6318MHUK46CY-T Voltage Supervisors applications.

• Consumer electronics
• Radio
• Military electronics
• Electronics installed in the vehicle
• Transformer load monitoring equipment
• Fire equipment power monitoring system
• Detection of phase imbalance
• Power distribution systems of ICU
• DC stabilized power supply module
• Data storage applications