MAX6320PUK46CY+T Overview

Power management is mounted through 5 terminals. Tape & Reel (TR)-packaging is used. Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 3V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 5 pins on IC management. 5 pins are present on the power management system. It is recommended that Vsup should not be less than 1V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. The power management's supply current is 10μA. A similar IC managements number of the manufacturer can always be found by using MAX6320, the base power ics number.

MAX6320PUK46CY+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current

MAX6320PUK46CY+T Applications

There are a lot of Maxim Integrated MAX6320PUK46CY+T Voltage Supervisors applications.

• Electronics installed in the vehicle
• Power distribution systems of CCU
• Electrical fire monitoring system
• Sensitive sensors
• Data storage applications
• DVR
• Embedded computing
• Cloud computing
• Detection of phase sequence
• Power distribution systems of operating room