MAX6338EUB Overview

There are 10 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tube way. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 4 channels that can be found. For your reference, this PMIC includes a list of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 245. The supervisor is always powered by a 3V volt supply. Power management conducts at a voltage of 4. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. Power management has a total of 10 pins. There are 10 pins on the supervisor. A voltage (Vsup) that doesn't fall below 2.5V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supervisor's supply current is specified to 35μA. A similar IC managements number of the manufacturer can always be found by using MAX6338, the base power ics number. The voltage supervisor requires a power source of 3/5V volts in order to work correctly.

MAX6338EUB Features

Multi-Voltage Supervisor type
Minimum supply voltage of 2.5V
35μA operating supply current

MAX6338EUB Applications

There are a lot of Maxim Integrated MAX6338EUB Voltage Supervisors applications.

• Battery cars
• Microprocessor system
• Dash board
• Battery-powered equipment
• Detection of phase sequence
• Radar
• emergency room
• Electronics installed in the vehicle
• Digitally controlled LDO regulators circuit
• Sensitive sensors