MAX6338KUB+ Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 10 in total. Tube-packaging is used. Please refer to this PMIC for 1 functions. A series of 4 channels can be found on this supervisor. Please find attached 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for your reference in this IC power. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 3V. There is a voltage supply of 4 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 10 pins on IC management. The pins of the power management system count 10. There should be a minimum voltage supply (Vsup) of 2.5V for this PMIC. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. The supervisor's supply current is specified to 35μA. A similar IC managements number of the manufacturer can always be found by using MAX6338, the base power ics number. The power management must be powered by 3/5V volts to function properly.

MAX6338KUB+ Features

Multi-Voltage Supervisor type
Minimum supply voltage of 2.5V
35μA operating supply current

MAX6338KUB+ Applications

There are a lot of Maxim Integrated MAX6338KUB+ Voltage Supervisors applications.

• DC stabilized power supply module
• DVR
• Radar
• emergency room
• Military communications
• Satellite navigation
• Solar power charger
• Military electronics
• Leakage current detection
• Electronics installed in the vehicle