MAX6338KUB+T Overview

As you can see, this power management is mounted through 10 terminals. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. There are a total of 4 channels on this supervisor, and they are arranged in a series. Please find attached 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for your reference in this IC power. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Manage ics operate at 3V supply voltages. IC management conducts in a 4-voltage supply. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 10 pins are present in total in this power management. There are 10 pins on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2.5V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. The supervisor's supply current is specified to 35μA. You can always use MAX6338, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 3/5V volts to function properly.

MAX6338KUB+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 2.5V
35μA operating supply current

MAX6338KUB+T Applications

There are a lot of Maxim Integrated MAX6338KUB+T Voltage Supervisors applications.

• Satellite navigation
• Utility meter
• Automotive permanent magnet synchronous motors
• Analog circuit
• Medical-specific insulation monitor
• Detection of phase loss
• Computer applications
• Battery cars
• Microcontroller system
• Radar