MAX6338NUB+T Overview

There are 10 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. Power management consists of 4 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. The package peak reflow temperature is specified to be 260. IC management conducts at a voltage of 3V. A supply voltage of 4 is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. There is a subcategory called Power Management Circuits for this power management. There are a total of 10 pins on power management. This power management system has 10 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.5V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. For this power management, there is an 35μA volt supply current. You can always use MAX6338, the base supervisor number, to search for similar PMICs of the manufacturer. To operate this power management, you will need at least 3/5V volts of power.

MAX6338NUB+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 2.5V
35μA operating supply current

MAX6338NUB+T Applications

There are a lot of Maxim Integrated MAX6338NUB+T Voltage Supervisors applications.

• WiFi router
• Smart meter
• Microprocessor system
• Data storage applications
• Linux and server computing
• Power distribution systems of operating room
• Cloud computing
• Leakage protection
• Transformer load monitoring equipment
• Power distribution systems of ICU