MAX6342MUT+T Overview

It is mounted through 6 terminals on the power management. It is packaged with Strip. To assist you, this IC power includes 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find SOT-23-6 functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 3V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. A total of 6 pins are located on this power management. Power managment ic pin count is 6. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supply current of the power management is 30μA. As well as this, there are other features to mention such as [0], for example.

MAX6342MUT+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
30μA operating supply current

MAX6342MUT+T Applications

There are a lot of Maxim Integrated MAX6342MUT+T Voltage Supervisors applications.

• Microcontroller system
• DC stabilized power supply module
• Medical-specific insulation monitor
• Smart meter
• Microprocessor system
• emergency room
• Precision measurement
• Electronics installed in the vehicle
• Battery-powered equipment
• Fire equipment power monitoring system