MAX6346XR35-T Overview

There are 3 terminals connected to this power management, which makes it easy to mount. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find SC-70, SOT-323 functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 3V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 3 pins are located on this power management. 3 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The power management's supply current is 500nA. For similar manage ics search of the manufacturer, you can always refer to MAX6346, the base PMIC number.

MAX6346XR35-T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
500nA operating supply current

MAX6346XR35-T Applications

There are a lot of Maxim Integrated MAX6346XR35-T Voltage Supervisors applications.

• Important electronics for automotive safety
• Urban rail transit weak current power monitoring
• Automotive power systems
• Satellite navigation
• Electrical fire monitoring system
• Power distribution systems of ICU
• WiFi router
• Refrigeration
• Analog circuit
• Detection of phase imbalance