MAX6358RWUT+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find SOT-23-6 functions for you to refer to. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. IC management conducts in a 5V-voltage supply. In a 2 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. The total number of pins on this power management is 6. 6 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. It is estimated that the voltage supervisor's supply current is 20μA. A similar IC managements number of the manufacturer can always be found by using MAX6358, the base power ics number.

MAX6358RWUT+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
20μA operating supply current

MAX6358RWUT+T Applications

There are a lot of Maxim Integrated MAX6358RWUT+T Voltage Supervisors applications.

• Precision measurement
• Power communication system
• Display equipment
• Battery-powered equipment
• Medical-specific isolation transformer
• Electrical fire monitoring system
• Detection of phase sequence
• Power distribution systems of operating room
• Battery cars
• Military electronics