MAX6361HUT23+ Overview

This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. Power management is possible to find a series of 1 functions. There are 2 channels available on this supervisor, and each channel has a different function. In this IC management you will find SOT-23-6 functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 2.38V for the PMIC chip, and the chip conducts at that voltage. Power ics operate at 1 supply voltages. Surface Mount mounts power management on the wall. Power management has a total of 6 pins. There are 6 pins on the power managment ic. It is recommended that Vsup should not be less than 0V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~85°C TA . While in operation, this supervisor has a voltage output of Open Drain or Open Collector. Additionally, there are many other features that can be found inside of the power management, such as [0].

MAX6361HUT23+ Features

Battery Backup Circuit type
Minimum supply voltage of 0V

MAX6361HUT23+ Applications

There are a lot of Maxim Integrated MAX6361HUT23+ Voltage Supervisors applications.

• Kitchen appliances
• Radar
• Consumer electronics
• Data storage applications
• Radio
• Smartphones
• Unattended substation automation
• Electric heating appliances
• Multi-voltage system
• Analog circuit