MAX6361PUT29+T Overview

There are 6 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. In this IC management you will find SOT-23-6 functions for you to refer to. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 2.38V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. By Surface Mount, IC management has been mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 6 pins in it. 6 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 0V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountTemperature setting for the supervisors should be -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. It is estimated that the voltage supervisor's supply current is 15μA. For similar manage ics search of the manufacturer, you can always refer to MAX6361, the base PMIC number. It requires 2.5/5V watts of power to operate this voltage supervisor.

MAX6361PUT29+T Features

Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current

MAX6361PUT29+T Applications

There are a lot of Maxim Integrated MAX6361PUT29+T Voltage Supervisors applications.

• Power distribution systems of CCU
• Utility meter
• Microcontroller system
• Network equipment
• Important electronics for automotive safety
• emergency room
• Household appliances
• Multi-voltage system
• Rechargeable batteries
• Consumer electronics