MAX6363PUT44+T Overview

There are 6 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Strip. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 2 channels, each of which can be used independently. Please find attached SOT-23-6 functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. Packages are specified to have an average peak reflow temperature of 260. When a supply voltage of 2.38V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 6 pins on IC management. This power management system has 6 pins. Supply voltage (Vsup) should be at least 0V for this power management. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 15μA. There are also other features in the software such as [0], just to mention a few. To operate this power management, you will need at least 2.5/5V volts of power.

MAX6363PUT44+T Features

Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current

MAX6363PUT44+T Applications

There are a lot of Maxim Integrated MAX6363PUT44+T Voltage Supervisors applications.

• Military communications
• Transformer load monitoring equipment
• Satellite navigation
• Refrigeration
• Medical-specific isolation transformer
• Power distribution systems of CCU
• Battery cars
• Electronics installed in the vehicle
• Medical-specific insulation monitor
• Unattended substation automation