MAX6364LUT31+T Overview

There are 6 terminals on this power management that allow it to be mounted. A Tape & Reel (TR) package is used to package the power management. For your reference, this IC power includes a list of 1 functions. A series of 2 channels can be found on this supervisor. As a reference, this IC power includes SOT-23-6 functions for your convenience. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 2.38V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. The mount is provided by Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 6 pins in it. Pin count of the power management is 6. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 0V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. Additionally, IC management are a variety of features, for example [0], to name a few. It is always advisable to use MAX6364, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 2.5/5V volts of power.

MAX6364LUT31+T Features

Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current

MAX6364LUT31+T Applications

There are a lot of Maxim Integrated MAX6364LUT31+T Voltage Supervisors applications.

• Rechargeable batteries
• Insulation fault location system
• Magnetic resonance imaging
• WiFi router
• Multi-voltage system
• Network equipment
• Smartphones
• Digitally controlled LDO regulators circuit
• Detection of phase imbalance
• Detection of phase loss