MAX6365HKA26-T Overview

As you can see, this power management is mounted through 8 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Power management is possible to find a series of 1 functions. A series of 2 channels can be found on this supervisor. Please refer to power management for SOT-23-8 functions. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 245 is specified for the package. The supervisor is always powered by a 2.8V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 8 pins on IC management. There are 8 pins on the power managment ic. It is recommended that Vsup should not be less than 0V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. There are other features such as MANUAL RESET INPUT to name a few. You can always use MAX6365, the base supervisor number, to search for similar PMICs of the manufacturer. It requires 2.5/5V watts of power to operate this voltage supervisor.

MAX6365HKA26-T Features

Battery Backup Circuit type
Minimum supply voltage of 0V

MAX6365HKA26-T Applications

There are a lot of Maxim Integrated MAX6365HKA26-T Voltage Supervisors applications.

• Medical-specific isolation transformer
• Stable power system
• Medical-specific insulation monitor
• Data storage applications
• Battery cars
• Microcontroller system
• Display equipment
• Battery-powered equipment
• Low voltage/high power - AI, GPU
• Battery cars